Manufacturing and manufacturing industries

Vol. 2 No. 27 (2025) / 2025-06-28 / Number of views: 216

FILTRATION OF INCOMPRESSIBLE FLUID IN A VERTICAL WELL

Authors

Atyrau University of Oil and Gas named after S.Utebayev
https://orcid.org/0000-0002-4776-2251
Atyrau University of Oil and Gas named after S.Utebayev
https://orcid.org/0000-0002-6628-024X
Atyrau University of Oil and Gas named after S.Utebayev
https://orcid.org/0009-0002-0137-228X
Atyrau University of Oil and Gas named after S.Utebayev
https://orcid.org/0000-0003-3459-0515
Atyrau University of Oil and Gas named after S.Utebayev
https://orcid.org/0000-0003-2783-469X
Atyrau University of Oil and Gas named after S.Utebayev
https://orcid.org/0009-0002-4850-4294
Atyrau University of Oil and Gas named after S.Utebayev
https://orcid.org/0000-0003-2236-0333

Keywords

hydraulic engineering characteristics, fluid filtration, sanding, oil recovery, gravel filter, plunger pump

Link to DOI:

https://doi.org/10.58805/kazutb.v.2.27-817

How to quote

Bisengaliev, M., et al. “FILTRATION OF INCOMPRESSIBLE FLUID IN A VERTICAL WELL”. Vestnik KazUTB, vol. 2, no. 27, June 2025, doi:10.58805/kazutb.v.2.27-817.

Abstract

The results of the research allowed to study the processes in bottom-hole zone (BHZ) and wellbore in the regimes characteristic of complicated operating conditions without taking into account filtration. However, the operation of such wells for oil production is inextricably linked with filtration of water-oil mixture displaced from the reservoir. Therefore, under such complications it is also necessary to investigate the operation mode of the CCD under filtration conditions, i.e. filtration processes both in natural manifestation and with the use of special filters. In this connection, for specification of operational parameters of the process of oil production by SHSNU we study the hydrodynamics of the process of oil displacement from the reservoir taking into account the application of filtration devices [1].  

In oilfield practice, downhole filtration devices are used, among which gravel downhole filter is the simplest and cheapest design available in the conditions of field repair [2]. To create it, a coarse-grained material (e.g., gravel) is poured into the open part of the wellbore in the productive formation and a net-type packer is installed in the upper part of the wellbore near the formation roof to prevent the oil flow from carrying the filling away.

The purpose of this article is to derive equations for calculating the hydraulic characteristics of an oil production well with a gravel filter and their solution. On this basis, justification of the operating parameters of the filtration process without taking into account and taking into account the effect on the CCD of plunger immersion of rod well pumping units (RWPU). The choice of such a method of struggle against sand penetration is connected with the fact that unlike perforation design filtrates [3,4].