Manufacturing and manufacturing industries

Vol. 2 No. 31 (2026) / 2026-06-30 / Number of views: 99

EVALUATION OF THE VOLUME OF A LARGE-SIZED MINING WORKING

Authors

"Soyuzgeomekh" LLP
https://orcid.org/0000-0001-8069-0037
Institute of Information and Computational Technologies
https://orcid.org/0000-0001-7261-6187
Kazakh-British Technical University
https://orcid.org/0000-0001-9916-4168
"Soyuzgeomekh" LLP
https://orcid.org/0009-0000-7887-0733

Keywords

mine working, excavation geometry, vertical cross-sections, ellipsoid, rectangular prisms, vertical segments, square grid, laser rangefinder

Link to DOI:

https://doi.org/10.58805/kazutb.v.2.31-1526

How to quote

Zeinullin А.А., et al. “EVALUATION OF THE VOLUME OF A LARGE-SIZED MINING WORKING”. Vestnik KazUTB, vol. 2, no. 31, June 2026, doi:10.58805/kazutb.v.2.31-1526.

Abstract

Determining the volume of underground mine workings is essential for mineral extraction accounting, ventilation flow regulation, air distribution calculations, and effective isolation of mined-out areas and emergency zones (including those affected by underground fires). This process involves calculating the volume of rock mass required for work planning, cost estimation, and material consumption control, and is performed using the cross-section method.

The relevance of understanding the geometric characteristics of mine workings arises from several factors: the dynamics of the stress-strain state around the excavation directly influence its geometric shape and dimensions; optimization of the cross-sectional dimensions reduces the volume of excavation work and associated support costs; precise knowledge of geometry is necessary for predicting and monitoring high-pressure zones; and cost minimization is achieved through the elimination of re-supporting and improved ventilation efficiency.

The objectives of mine working volume estimation include: accurate quantification of extracted rock or mineral resources; verification of compliance with design parameters; calculation and optimisation of blasting operations; assessment of rock mass stability to ensure mining safety; enhancement of economic efficiency; and operational monitoring of the working's condition.

It is demonstrated that a significant reduction in the labour intensity of volume estimation for large-scale mine workings can be achieved by replacing the excavation surface with a set of endpoints of uniformly spaced vertical lines extending from the floor to the roof, measured using contactless methods.