Information and communication and chemical technologies

Vol. 2 No. 31 (2026) / 2026-06-30 / Number of views: 92

PHYSICOCHEMICAL CHARACTERISTICS OF ACTIVATED CARBONS FROM SAWDUST AND THEIR APPLICATION IN WATER PURIFICATION

Authors

Institute of Coal Chemistry and Technology
https://orcid.org/0000-0001-9016-3062
Institute of Coal Chemistry and Technology
https://orcid.org/0000-0003-1556-9526
Institute of Coal Chemistry and Technology
https://orcid.org/0000-0002-9497-7319
Institute of Coal Chemistry and Technology
https://orcid.org/0009-0006-2181-6019
Institute of Coal Chemistry and Technology
https://orcid.org/0000-0002-9497-7319
Sustainability of Ecology and Bioresources Scientific Research Institute
https://orcid.org/0000-0002-5262-5155
Sustainability of Ecology and Bioresources Scientific Research Institute
https://orcid.org/0000-0002-2338-8816
Sustainability of Ecology and Bioresources Scientific Research Institute
https://orcid.org/0000-0001-9060-0111
Sustainability of Ecology and Bioresources Scientific Research Institute
https://orcid.org/0000-0002-5879-3475
Institute of Coal Chemistry and Technology
https://orcid.org/0009-0000-7894-5723
Nazarbayev University
https://orcid.org/0009-0004-7793-9945
Institute of Metallurgy and Ore Beneficiation
https://orcid.org/0000-0003-3087-0616

Keywords

adsorbent, waste, wood sawdust, activation, specific surface area

Link to DOI:

https://doi.org/10.58805/kazutb.v.2.31-1488

How to quote

Kazankapova М.К., et al. “PHYSICOCHEMICAL CHARACTERISTICS OF ACTIVATED CARBONS FROM SAWDUST AND THEIR APPLICATION IN WATER PURIFICATION”. Vestnik KazUTB, vol. 2, no. 31, June 2026, doi:10.58805/kazutb.v.2.31-1488.

Abstract

This paper investigates the production of activated carbon adsorbents based on wood sawdust (WSD) via carbonization and chemical activation with potassium hydroxide, and evaluates their potential for wastewater treatment. The aim of the study was to investigate the influence of the sawdust/KOH mass ratio and heat treatment conditions on the formation of the porous structure, physicochemical, and adsorption characteristics of the resulting materials. Chemical activation at 900°C was found to significantly enhance the micro- and mesoporous structure and increase the BET specific surface area from 38.9 to 776 m²/g, with the total pore volume increasing to 0.385 cm³/g. Raman spectroscopy data showed that the degree of graphitization of the activated carbons ranged from 19.3 to 27.4%, indicating the formation of a more ordered carbon matrix. SEM and elemental analysis results confirmed the formation of a developed porous structure and an increase in carbon content to 99.6%. Practical testing of activated carbon based on sawdust impregnated with KOH in a ratio of WSD/KOH 1:1 (AC-2) during the treatment of real wastewater showed high efficiency in removing organic pollutants, petroleum products and surfactants (up to 90–94%). These results confirm the potential of using activated carbons based on wood waste in water treatment and environmental protection technologies.