Information and communication and chemical technologies

Vol. 1 No. 30 (2026) / 2026-03-30 / Number of views: 112

FEATURES OF OBTAINING AND STABILIZING INHIBITORY FREE-DISPERSED HYDROGEL COAGULATION-TYPE FLUSHING SYSTEMS

Authors

S.Seifullin Kazakh Agrotechnical Research University
https://orcid.org/0000-0001-8163-7035
Altai Geological and Ecological Institute
https://orcid.org/0009-0002-5015-5265
S.Seifullin Kazakh Agrotechnical Research University
https://orcid.org/0000-0001-7812-2540
S.Seifullin Kazakh Agrotechnical Research University
https://orcid.org/0000-0002-3232-5972
LLC «Bentonite of Khakassia»
https://orcid.org/0009-0001-3003-5760

Keywords

bentonite, hydrogel, polysaccharide, peptization, coagulation, polymer-clay solution, lyophilic suspension

Link to DOI:

https://doi.org/10.58805/kazutb.v.1.30-1445

How to quote

Rozhkova, O.V., et al. “FEATURES OF OBTAINING AND STABILIZING INHIBITORY FREE-DISPERSED HYDROGEL COAGULATION-TYPE FLUSHING SYSTEMS”. Vestnik KazUTB, vol. 1, no. 30, Mar. 2026, doi:10.58805/kazutb.v.1.30-1445.

Abstract

The paper examines the physicochemical fundamentals of the formation, stabilization, and controlled peptization of inhibitory free - dispersed hydrogel flushing systems of the coagulation type used in oil and gas well construction. A comparative analysis of clay - based and polymer hydrogels was carried out, and the key limitations of their practical application were identified, associated with the low coagulation stability of bentonite suspensions as well as the thermal and biodegradation of polymer gels.

Based on the concepts of DLVO theory, colloid chemistry, and the thermodynamics of coagulation processes, the conditions for obtaining stable bentonite hydrogels with a peptized dispersed phase were substantiated. It was shown that preliminary dilution of the clay suspension to an optimal concentration of colloidal particles, combined with polymer-induced lyophilization of the dispersed phase surface, significantly reduces the rate of slow coagulation and enhances the electrostatic and structural - mechanical stability of the system.

The regularities of the influence of anionic and nonionic polysaccharide-based polymers on the formation of protective adsorption - solvation layers, the height of the electrostatic coagulation barrier, and the depth of the secondary potential minimum were established. The expediency of the combined use of anionic (carboxymethyl cellulose) and nonionic (starch, lignosulfonates) polymers to ensure an optimal balance between the mobility and strength of protective layers was substantiated.

It was demonstrated that the introduction of coagulating salts of alkali, alkaline earth, and amphoteric metals leads to the development of reversible coagulation in the secondary potential minimum due to a decrease in the surface charge of clay particles and partial destruction of polymer adsorption shells. The basic rules for the controlled peptization of polymer - clay systems, implemented by mechanical or ionic methods, were formulated, and the conditions under which coagulation retains a reversible character were determined.

The obtained results make it possible to purposefully regulate the rheological, structural -mechanical, and inhibitory properties of hydrogel flushing systems and can be used in the development of highly efficient low-clay and non - dispersing drilling fluids for complex thermobaric conditions.