Manufacturing and manufacturing industries

Vol. 1 No. 30 (2026) / 2026-03-30 / Number of views: 151

STABILITY RESEARCH OF MINE WORKINGS DURING THE DEVELOPMENT AND MINING TECHNOLOGY OF RESERVES OF THE WESTERN ORE ZONE OF THE ABYZ MINE AT THE 320–190 M LEVEL

Authors

LLC "Kazakhmys Corporation"
https://orcid.org/0000-0002-4347-8608
LLC "Scientific and Technical Center for Industrial Safety"
https://orcid.org/0009-0008-0391-9430
LLC "Scientific and Technical Center for Industrial Safety"
https://orcid.org/0000-0002-1513-5317
LLC "Scientific and Technical Center for Industrial Safety"
https://orcid.org/0009-0005-4335-7610

Keywords

stability of mine workings, Abyz mine, geomechanical monitoring, rock mass jointing, RQD index, Hoek-Brown criterion, kinematic instability, stress-strain state

Link to DOI:

https://doi.org/10.58805/kazutb.v.1.30-1421

How to quote

Zhienbaev, A.B., et al. “STABILITY RESEARCH OF MINE WORKINGS DURING THE DEVELOPMENT AND MINING TECHNOLOGY OF RESERVES OF THE WESTERN ORE ZONE OF THE ABYZ MINE AT THE 320–190 M LEVEL”. Vestnik KazUTB, vol. 1, no. 30, Mar. 2026, doi:10.58805/kazutb.v.1.30-1421.

Abstract

This article presents the results of a comprehensive geomechanical study on the stability of development workings during the exploitation of the Western Ore Zone of the Abyz mine at depths of 190–320 m. The relevance of the work is driven by the need for scientific justification of the reasons for the violation of design contours of workings under conditions of a complex natural stress field and intensive rock mass jointing. In the course of the work, a detailed analysis of the physical and mechanical characteristics of rocks was carried out, which were classified into three main geomechanical domains: from strong massive ores to weak metasomatites.

The research methodology is based on in-situ measurements of fracturing parameters (742 measurements), assessment of the Rock Quality Designation (RQD) index, and determination of the natural stress field using the hydraulic fracturing method. Using Dips, Unwedge, and RocLab software, mathematical modeling of the stress-strain state was performed, and the strength of the rock mass was assessed according to the Hoek-Brown criterion. The study established that the leading mechanism of stability loss is kinematic instability, manifested in the fallouts of structural blocks, which is significantly enhanced by the impact of high horizontal tectonic stresses exceeding vertical ones by 1.6 times. The results obtained allow for high-accuracy prediction of potential failure zones and justify the need for a differentiated approach to assessing the stability of drifts and crosscuts depending on their orientation relative to the main joint systems.