Information and communication and chemical technologies

Vol. 1 No. 30 (2026) / 2026-03-30 / Number of views: 125

THE USE OF MAN-MADE WASTE AS FILLERS FOR POLYMER COMPOSITES

Authors

K. Zhubanov Aktobe Regional University
https://orcid.org/0000-0002-6198-3018
K. Zhubanov Aktobe Regional University
https://orcid.org/0009-0007-4359-2690
K. Zhubanov Aktobe Regional University
https://orcid.org/0000-0002-9236-5909
K. Zhubanov Aktobe Regional University
https://orcid.org/0009-0001-3055-4464
K. Kulazhanov Kazakh University of Technology and Business
https://orcid.org/0000-0001-6743-8953

Keywords

man-made waste, fillers, cullet, red sludge, composite, recycling

Link to DOI:

https://doi.org/10.58805/kazutb.v.1.30-1392

How to quote

Orynbasar, R.O., et al. “THE USE OF MAN-MADE WASTE AS FILLERS FOR POLYMER COMPOSITES”. Vestnik KazUTB, vol. 1, no. 30, Mar. 2026, doi:10.58805/kazutb.v.1.30-1392.

Abstract

In conditions of increasing volumes of industrial waste, the problem of their disposal is acute. One of the promising areas is the use of man-made waste as fillers for polymer composite materials. This review article examines modern approaches (2018-2025) to the processing of fly ash, metallurgical slags, construction debris, red sludge, cullet and other waste by introducing them into polymer matrices (thermoplastics, thermosetting resins, etc.). Information is provided on the effect of such fillers on the mechanical, physico-chemical and thermal properties of composites, and their comparative analysis is performed. Special attention is paid to implemented technologies and patents demonstrating the practical use of waste (for example, filling PVC materials with fly ash for pipes). The environmental and economic efficiency of such waste disposal is analyzed: reducing the load on landfills, replacing scarce mineral fillers and reducing the cost of products. Classical works are mentioned and links to current research in recent years are provided, confirming the growing interest in “green” composites based on recycled materials. The information obtained demonstrates that the use of man–made waste in polymer composites is a sought-after and justified step towards resource conservation and environmental safety.