Information and communication and chemical technologies

Vol. 4 No. 29 (2025) / 2025-12-30 / Number of views: 174

ANALYSIS OF THE PROSPECTS FOR THE USE OF FLY ASH IN THE PRODUCTION OF COMPOSITE MATERIALS USING THE EXAMPLE OF ENERGY WASTE IN THE REPUBLIC OF KAZAKHSTAN

Authors

Toraigyrov University
https://orcid.org/0009-0005-2010-9227
Toraigyrov University
https://orcid.org/0000-0002-6209-5215
Toraigyrov University
https://orcid.org/0000-0001-8242-0655
Toraigyrov University
https://orcid.org/0000-0001-8668-472X
Satbayev University
https://orcid.org/0000-0001-9872-6317

Keywords

ceramic materials, fly ash, thermal power plants, ash and slag waste, granulometric analysis, scanning electron microscopy, ceramic mass

Link to DOI:

https://doi.org/10.58805/kazutb.v.4.29-1305

How to quote

Maussumbayev, S.S., et al. “ANALYSIS OF THE PROSPECTS FOR THE USE OF FLY ASH IN THE PRODUCTION OF COMPOSITE MATERIALS USING THE EXAMPLE OF ENERGY WASTE IN THE REPUBLIC OF KAZAKHSTAN”. Vestnik KazUTB, vol. 4, no. 29, Dec. 2025, doi:10.58805/kazutb.v.4.29-1305.

Abstract

In this article, the authors consider modern methods of analysis and prospects for the use of fly ash in the production of ceramic products. The authors investigated ash and slag waste Thermal power plants and GRES, their physico-chemical and physico-mechanical properties, as well as samples of ceramic materials obtained on the basis of them.

As you know, currently more than 80% of all operating thermal power plants (CHP) and hydroelectric power plants (GRES) in the world are still coal-fired. The use of coal as a fuel source at thermal power plants and GRES is still associated with large reserves of coal deposits. This indicates that the volume of stored ash and slag waste is increasing annually. With an increase in the volume of sludge storage facilities, territories and basins for storing the generated fly ash and waste water are increasing. This problem also applies to our country, where the main problem is their disposal and recycling.

In the course of the research, the authors obtained the results of the physico-chemical and physico-mechanical properties of ceramic product samples and drew conclusions about the prospects of using fly ash as an additive agent in the composition of ceramic mass. During the research, optimal compositions of raw materials based on fly ash were selected to obtain samples of composite products.