Information and communication and chemical technologies

Vol. 4 No. 29 (2025) / 2025-12-30 / Number of views: 177

IMPROVEMENT OF THE OXIDATION TECHNOLOGY FOR HEAVY OIL RESIDUES FROM KARAZHANBASS OIL

Authors

Safi Utebaev Atyrau University of Oil and Gas
https://orcid.org/0000-0001-8508-1863
Safi Utebaev Atyrau University of Oil and Gas, Kh. Dosmukhamedov Atyrau University
https://orcid.org/0000-0002-2733-986X
Safi Utebaev Atyrau University of Oil and Gas
https://orcid.org/0000-0002-2298-4800
Safi Utebaev Atyrau University of Oil and Gas
https://orcid.org/0000-0002-2307-8463
Safi Utebaev Atyrau University of Oil and Gas
https://orcid.org/0000-0001-5323-0916
K.Kulazhanov Kazakh University of Technology and Business
https://orcid.org/0000-0001-9171-2238

Keywords

heavy oil residues, Karazhanbas oil, road bitumen, catalytic oxidation, energy efficiency, road construction

Link to DOI:

https://doi.org/10.58805/kazutb.v.4.29-1298

How to quote

Bukanova, S.K., et al. “IMPROVEMENT OF THE OXIDATION TECHNOLOGY FOR HEAVY OIL RESIDUES FROM KARAZHANBASS OIL”. Vestnik KazUTB, vol. 4, no. 29, Dec. 2025, doi:10.58805/kazutb.v.4.29-1298.

Abstract

Current trends in the development of Kazakhstan's oil refining and road construction industries require the introduction of energy-efficient and environmentally sound technologies for bitumen production. In the context of growing demand for high-quality binding materials, catalytic oxidation processes are becoming particularly relevant, as they allow reactions to be intensified at mild temperatures and reduce the load on equipment.

This work is aimed at experimentally proving the possibility of replacing the traditional ‘re-oxidation-dilution’ scheme with a simplified technology of direct catalytic oxidation of heavy oil residues from Karazhanbas oil using potassium permanganate (KMnO₄) as an active catalyst. The main task was to obtain BND 70/100 road bitumen that meets the requirements of ST RK 1373-2013, while reducing energy costs and eliminating the compounding stage.

The study used tar and darkened vacuum fraction obtained from Karazhanbas oil. Oxidation was carried out in a batch laboratory reactor at temperatures of 140–260°C with a controlled air supply (1 l/kg∙min). A 0.5% potassium salt of manganic acid was used as a catalyst to accelerate the oxidation processes and form an asphalt-resinous bitumen structure. The selected samples were analysed according to ST RK and GOST standards: penetration, softening temperature, ductility and brittleness temperature were determined.

It was found that the introduction of KMnO₄ ensures a stable oxidation reaction at low temperatures, which leads to the formation of bitumen with high performance properties. The resulting product is characterised by a penetration of 111 (0.1 mm, 25°C), a softening point of 45°C, ductility above 150 cm and a brittleness temperature of -19°C. These indicators fully comply with the requirements for BND 70/100 bitumen. Materials and methods. The study used tar and darkened vacuum fraction obtained from Karazhanbas oil. Oxidation was carried out in a batch laboratory reactor at temperatures of 140–260°C with a controlled air supply (1 l/kg∙min). A 0.5% potassium salt of manganic acid was used as a catalyst to accelerate the oxidation processes and form an asphalt-resinous bitumen structure. The selected samples were analysed according to ST RK and GOST standards: penetration, softening temperature, ductility and brittleness temperature were determined.

The studies conducted confirmed the effectiveness of potassium permanganate as a catalyst in the oxidation of heavy oil residues. The proposed method is characterised by a simplified technological scheme, reduced energy consumption and increased environmental safety. The implementation of this approach at industrial facilities in Kazakhstan will optimise the production of road bitumen, increase resource conservation and ensure the stable quality of products from domestic oil refineries.