Manufacturing and manufacturing industries

Vol. 3 No. 28 (2025) / 2025-09-30 / Number of views: 83

FORMATION OF GRAIN AND GRINDING MODES DURING VARIETAL GRINDING OF TRITICALE GRAIN OF KAZAKHSTAN SELECTION

Authors

Almaty Technological University
https://orcid.org/0000-0002-8564-2912
Almaty Technological University
https://orcid.org/0000-0001-7908-5091
Almaty Technological University
https://orcid.org/0000-0002-7385-482X
Almaty Technological University
https://orcid.org/0000-0001-8731-5600
Almaty Technological University
https://orcid.org/0000-0002-8564-2912
Almaty Technological University
https://orcid.org/0000-0002-2818-9197

Keywords

triticale, semolina, ash content, extraction, gap between rollers, grinding mode, semolina formation, intermediate products

Link to DOI:

https://doi.org/10.58805/kazutb.v.3.28-1096

How to quote

Yakiyayeva, M., et al. “FORMATION OF GRAIN AND GRINDING MODES DURING VARIETAL GRINDING OF TRITICALE GRAIN OF KAZAKHSTAN SELECTION”. Vestnik KazUTB, vol. 3, no. 28, Sept. 2025, doi:10.58805/kazutb.v.3.28-1096.

Abstract

The article presents the results of a study on the formation of coarse-dunst products during the milling of triticale grain from Kazakhstani varieties. The physical and chemical properties of the grain of the varieties 'Taza', 'Aziada', and 'Kozha', differing in vitreousness (62%, 54%, and 38%, respectively), were determined. It was established that vitreousness has a significant impact on the formation of coarse-dunst products on the I–III break systems. Correlation relationships were identified between the parameters of granulation and the studied factors: a strong negative correlation between roll gap and extraction (r = –0.92), a positive correlation between vitreousness and the ash content of intermediate products (r = 0.85), and a pronounced non-linear trend in ash variation with changing gap. Approximate grinding regimes for the I, II, and III break systems were determined, ensuring an optimal balance between yield and ash content of intermediate products. The ‘Taza’ variety with high vitreousness demonstrated the highest extraction at an acceptable ash level, while the ‘Kozha’ variety was characterized by stable performance under milder grain disintegration conditions.