Information and communication and chemical technologies

Vol. 2 No. 27 (2025) / 2025-06-28 / Number of views: 340

RESEARCH OF THE PELLETIZATION PROCESS HIGH QUALITY IRON ORE CONCENTRATE USING NEW BINDING ADDITIVES

Authors

“Altai Geological-Ecological Institute” LLP
https://orcid.org/0000-0001-8163-7035
“Altai Geological-Ecological Institute” LLP
https://orcid.org/0009-0002-5015-5265
“Bentonite Khakassia” LLC
https://orcid.org/0009-0001-3003-5760
“Company Bentonit” LLC
https://orcid.org/0009-0009-9880-6259
S. Seifullin KazATRU
https://orcid.org/0000-0002-3232-5972

Keywords

bento-polymer composition, concentrate, technology, pelletizing process, iron ore charge

Link to DOI:

https://doi.org/10.58805/kazutb.v.2.27-954

How to quote

Rozhkova, O., et al. “RESEARCH OF THE PELLETIZATION PROCESS HIGH QUALITY IRON ORE CONCENTRATE USING NEW BINDING ADDITIVES”. Vestnik KazUTB, vol. 2, no. 27, June 2025, doi:10.58805/kazutb.v.2.27-954.

Abstract

One of the most important tasks in the preparation of raw materials for the production of pellets for metallurgical processing is quality management, which can be carried out by changing the composition of the charge, introducing a number of binding additives, as well as the heat treatment process.

This article presents the results of using high-quality binders to produce iron ore pellets with high compressive strength and low abrasion resistance.

The results obtained during laboratory tests to select the type of binders of «Tagbent» LLP for pelletizing concentrate of Sokolov-Sarbay Mining Production Association JSC (SSGPO JSC, Kazakhstan) indicate that the physical and mechanical properties of the fired pellets depend on a set of factors, among which the most important is the quality of raw pellets directly related to the properties of binding additives.

It has been shown that the recommended binding additives produced by «Tagbent» LLP (Kazakhstan, Tarbagatai district, Akzhar village) and bento-polymer composition (BPC) at a consumption in the charge of 0.49 - 0.50% make it possible to stabilize the granulometric composition of raw pellets, improve the strength characteristics of raw pellets, and improve the abrasion resistance of fired pellets.

Analysis of the quality characteristics of the finished product revealed a linear relationship with the specific consumption of bentonite, the optimization of which allows us to ensure the specified quality indicators of iron ore pellets.