Manufacturing and manufacturing industries

Vol. 3 No. 28 (2025) / 2025-09-30 / Number of views: 154

METHODS OF PROCESSING THE BOTTOMHOLE ZONE OF A WELL DURING THE EXTRACTION OF HIGH-VISCOSITY OILS

Authors

M.Auezov South Kazakhstan University
https://orcid.org/0000-0002-9406-3322
M.Auezov South Kazakhstan University
https://orcid.org/0009-0009-3110-7218
Institute of oil and gas of the Republic of Azerbaijan
https://orcid.org/0000-0002-1383-6240
M.Auezov South Kazakhstan University
https://orcid.org/0000-0001-6819-388X

Keywords

bottom-hole formation zone, permeability, oil, water, potassium bichromate

Link to DOI:

https://doi.org/10.58805/kazutb.v.3.28-913

How to quote

Baibotayeva, S., et al. “METHODS OF PROCESSING THE BOTTOMHOLE ZONE OF A WELL DURING THE EXTRACTION OF HIGH-VISCOSITY OILS”. Vestnik KazUTB, vol. 3, no. 28, Sept. 2025, doi:10.58805/kazutb.v.3.28-913.

Abstract

In this article, a new method has been developed, the task of which is to increase the efficiency of processing the bottomhole zone of a well by introducing a coolant into the bottomhole zone, which increases the solubility of the composition, the rate and volume of dissolution of difficult-to-dissolve deposits during processing of the bottomhole zone of producing wells, as well as penetrating deeply into the reservoir.

When this composition enters the oil-saturated pores of the reservoir, turpentine, as a good solvent, significantly reduces the resistance of undesirable petroleum acid emulsions and the further reaction of an aqueous solution of potassium bichromate with turpentine increases in the bottomhole zone of the well and the continuation of the reaction in the depth of the reservoir due to the displacement of the composition with gas from the outside.The applied composition reacts with aromatic hydrocarbons, as well as with paraffins. As a result of the reactions, various acid esters are obtained, which reduce the interfacial tension, increase the inhibitory effect, well dissolve deposits of heavy oil components in the rock pores and restore the permeability of the bottomhole and remote zone of the reservoir, resulting in improved oil flow from the reservoir to the well.