Manufacturing and manufacturing industries

Vol. 2 No. 27 (2025) / 2025-06-28 / Number of views: 179

POLYMER COMPOSITION TO REDUCE THE ABSORPTION OF DRILLING MUD

Authors

M.Auezov South Kazakhstan University
https://orcid.org/0000-0003-1859-5551
M.Auezov South Kazakhstan University
https://orcid.org/0009-0008-2130-1597
M.Auezov South Kazakhstan University
https://orcid.org/0000-0003-3323-8245
M.Auezov South Kazakhstan University
https://orcid.org/0000-0001-5633-1640
M.Auezov South Kazakhstan University
https://orcid.org/0000-0002-1914-398X

Keywords

oil, drilling mud, cotton fibers, polyacrylamide, fatty acids, gossypol resin, polymer drilling fluids, caustic soda, absorption of the solution, reduction of absorption

Link to DOI:

https://doi.org/10.58805/kazutb.v.2.27-729

How to quote

Bimbetova, G., et al. “POLYMER COMPOSITION TO REDUCE THE ABSORPTION OF DRILLING MUD”. Vestnik KazUTB, vol. 2, no. 27, June 2025, doi:10.58805/kazutb.v.2.27-729.

Abstract

The absorption of drilling mud during well drilling is associated with the opening of porous or fractured formations. Uptake may be caused by technological reasons or geological conditions of rock occurrence. Geological reasons are the type of absorbing formation, its thickness and depth of occurrence, insufficient rock resistance to hydraulic fracturing, reservoir pressure and characteristics of reservoir fluid, as well as the presence of other concomitant complications (landslides, oil and gas occurrences, overflows of reservoir waters, etc.). The technological reasons are the quantity and quality of drilling mud supplied to the well, the drilling method, the speed of descent operations, and others. This group includes factors such as technical equipment and organization of the drilling process.

The issues of the occurrence and the possibility of reducing the absorption of drilling mud in the well are considered. The existing methods of reducing the absorption of the solution are analyzed and recommendations are formulated for the implementation of successful drilling in complicated conditions.

This article presents the results of studies on the effect of modified polyacrylamide, as well as crushed cotton fiber in various ratios on the properties of drilling mud. These studies were conducted in order to reduce the rate of absorption of drilling mud through the cortical layer of the well wall. Studies have been conducted on the effect of the concentration of modified polyacrylamide and crushed cotton fiber on the rheological parameters of the drilling mud (static shear stress and conditional viscosity). It is shown that the introduction of crushed cotton fiber into the composition of a lightweight drilling mud containing bentonite clay leads to an increase in viscosity and at the same time reduces water loss, as well as contributes to the formation of a high-quality crust of the well wall.

Thus, the optimal composition of the solution was identified, which showed positive results in terms of the main indicators, which, according to the authors, will contribute to reducing the volume of absorbed solution when drilling oil and gas wells.