Manufacturing and manufacturing industries

Vol. 1 No. 30 (2026) / 2026-03-30 / Number of views: 125

APPLICATIONS OF HYDRAULIC FRACTURING TECHNOLOGIES AND THEIR MODIFICATIONS

Authors

S.Utebaev Atyrau University of Oil and Gas
https://orcid.org/0000-0002-4776-2251
S.Utebaev Atyrau University of Oil and Gas
https://orcid.org/0000-0001-7995-5560
The School of Chemical Sciences at Universiti Sains Malaysia
https://orcid.org/0000-0002-6784-5775
S.Utebaev Atyrau University of Oil and Gas
https://orcid.org/0000-0003-3459-0515
S.Utebaev Atyrau University of Oil and Gas
https://orcid.org/0000-0002-6628-024X
S.Utebaev Atyrau University of Oil and Gas
https://orcid.org/0000-0002-2477-9288
S.Utebaev Atyrau University of Oil and Gas
https://orcid.org/0000-0002-6327-870X
S.Utebaev Atyrau University of Oil and Gas
https://orcid.org/0000-0001-7670-2015

Keywords

hydraulic fracturing, well productivity, oil recovery enhancement, production intensification, bottomhole zone, filtration and storage properties, field development optimisation

Link to DOI:

https://doi.org/10.58805/kazutb.v.1.30-1432

How to quote

Bissengaliyev, M.D., et al. “APPLICATIONS OF HYDRAULIC FRACTURING TECHNOLOGIES AND THEIR MODIFICATIONS ”. Vestnik KazUTB, vol. 1, no. 30, Mar. 2026, doi:10.58805/kazutb.v.1.30-1432.

Abstract

The article discusses the theoretical and practical foundations of hydraulic fracturing (HF) as one of the key methods for increasing the productivity of oil wells, especially when developing low-permeability reservoirs. The main focus is on the need for reliable determination of the filtration and storage properties of the formation, since these characteristics largely determine the success of hydraulic fracturing and the economic feasibility of its application. A filtration model of the ‘well – bottomhole zone – formation’ system has been constructed, taking into account the structure and properties of Jurassic reservoirs, as well as the main reasons for productivity decline, including clogging and deterioration of hydrodynamic communication with the formation.

Based on the analysis of the results of hydraulic fracturing in injection and production wells in area development systems, it has been established that the increase in production depends on the ratio of the viscosities of oil and injected water. It is particularly emphasised that the greatest effect is achieved through a comprehensive approach combining hydraulic fracturing and treatment of the bottomhole zones of nearby wells. This approach ensures a more uniform impact on the formation, increases the coverage of the drainage zone and contributes to the long-term maintenance of increased production levels.

The conclusions confirm the need for comprehensive planning of measures to intensify production based on a detailed analysis of the geological and technical parameters of the field.