Information and communication and chemical technologies

Vol. 2 No. 31 (2026) / 2026-06-30 / Number of views: 135

THE EFFECT OF THE CHEMICAL COMPOSITION OF THE PULP ON THE EFFICIENCY OF FLOTATION DURING AUTOMATED PARAMETER CONTROL

Authors

K. Kulazhanov Kazakh University of Technology and Business
https://orcid.org/0000-0001-5202-3501
«AG Tech» LLP
https://orcid.org/0009-0003-3613-0130
K. Kulazhanov Kazakh University of Technology and Business
https://orcid.org/0000-0001-8069-0037
K. Kulazhanov Kazakh University of Technology and Business
https://orcid.org/0000-0001-9143-4581
«AG Tech» LLP
https://orcid.org/0009-0009-2520-7781
K. Kulazhanov Kazakh University of Technology and Business
https://orcid.org/0009-0001-1288-4136
«AG Tech» LLP
https://orcid.org/0009-0004-9133-6593
«AG Tech» LLP
https://orcid.org/0009-0004-8436-5943
«AG Tech» LLP
https://orcid.org/0009-0009-6261-7093
Toraigyrov University
https://orcid.org/0000-0003-4688-7869

Keywords

flotation, pulp chemistry, redox potential, extraction, online control, automation, intelligent methods

Link to DOI:

https://doi.org/10.58805/kazutb.v.2.31-1394

How to quote

Akishev К.М., et al. “THE EFFECT OF THE CHEMICAL COMPOSITION OF THE PULP ON THE EFFICIENCY OF FLOTATION DURING AUTOMATED PARAMETER CONTROL”. Vestnik KazUTB, vol. 2, no. 31, June 2026, doi:10.58805/kazutb.v.2.31-1394.

Abstract

The relevance of the research lies in the need to increase the stability and selectivity of ore processing in conditions of changing chemical composition of the pulp and the requirements for automation by process control. The aim of the work was to evaluate the influence of the parameters of the pulp chemistry on the efficiency of flotation, to justify the use of analytical and intelligent methods for adaptive process control.

The study uses methods of online monitoring of pH, redox potential (Eh) using electrochemical sensors, laboratory analyses of the ionic composition of the liquid phase, analytical and predictive data processing methods. The analysis of the relationship between the chemical parameters of the pulp and the technological parameters of flotation is carried out.

It has been established that the key integral parameter is the redox potential Eh. The optimal Eh range (-50...+150 mV) has been determined, at which the maximum copper recovery values are achieved, going beyond this range leads to a reduction in recovery by 5-12%. The effect of pH (8.6–9.2) and concentrations of Ca2⁺ and SO₄2⁻ ions on the selectivity of flotation and the stability of the foam layer is shown. The possibility of predicting a decrease in copper recovery based on the analysis of Eh dynamics and time control has been qualitatively confirmed.

The practical significance of the work is to substantiate the integration of online monitoring of pulp chemistry and predictive algorithms into the contours of automated control systems for flotation to increase the reliability and efficiency of the process. Further research is aimed at developing soft sensors and scaling the proposed solutions for industrial environments.