Information and communication and chemical technologies

Vol. 1 No. 30 (2026) / 2026-03-30 / Number of views: 134

AUTOMATED DETERMINATION OF THE CONTENT OF CHEMICAL ELEMENTS IN ORE IN FACTORY CONDITIONS

Authors

K.Kulazhanov Kazakh University of Technology and Business
https://orcid.org/0000-0001-5202-3501
K.Kulazhanov Kazakh University of Technology and Business
https://orcid.org/0000-0001-8069-0037
K.Kulazhanov Kazakh University of Technology and Business
https://orcid.org/0000-0001-9143-4581
LLP «AG Tech»
https://orcid.org/0009-0003-3613-0130
LLP «AG Tech»
https://orcid.org/0009-0009-2520-7781
LLP «AG Tech»
https://orcid.org/0009-0004-9133-6593
K. Kulazhanov Kazakh University of Technology and Business
https://orcid.org/0009-0001-1288-4136
LLP «AG Tech»
https://orcid.org/0009-0009-6261-7093
K.Kulazhanov Kazakh University of Technology and Business
https://orcid.org/0000-0001-8172-4956

Keywords

X-ray radiometric analysis, elemental composition, spectral ratios, pre-enrichment, lump ore, hardware and software complex

Link to DOI:

https://doi.org/10.58805/kazutb.v.1.30-1389

How to quote

Akishev К.М., et al. “AUTOMATED DETERMINATION OF THE CONTENT OF CHEMICAL ELEMENTS IN ORE IN FACTORY CONDITIONS”. Vestnik KazUTB, vol. 1, no. 30, Mar. 2026, doi:10.58805/kazutb.v.1.30-1389.

Abstract

The relevance of the study is due to the need for prompt and reliable determination of the chemical composition of ore in processing plants in order to increase the efficiency of ore preparation and reduce energy costs. The aim of the study is to develop and validate a method for automated online analysis of the copper content in lump ore using X-ray radiometric technology. The spectral ratio parameter H=NCu/NS is used as the main analytical feature, which provides compensation for matrix and geometric effects during in-line measurement.

The research methods included laboratory and dynamic tests of X-ray radiometric separation, virtual and experimental sorting of lump ore, as well as comparison of analytical parameters with the results of chemical analysis. A stable linear correlation has been established between the H parameter and the copper content, which confirms the quantitative applicability of the method. The optimal range of the cut–off threshold H ≈ 0.14–0.15 has been determined, at which an industrial product with a Cu content of 3.0-5.0% is formed at a yield of 2-12% and removal of up to 88-98% of the mass in the form of poor tailings.

The scientific novelty of the work lies in the experimental confirmation of the applicability of the spectral relations method for online analysis of lump ore in a factory stream and the integration of the analytical feature into the architecture of the software and hardware complex.

The practical significance lies in the possibility of using the data obtained to monitor the quality of the ore flow and optimize the pre-processing modes.

Further research is aimed at expanding the range of identified elements, pilot testing and integration of analytical data into digital models of enrichment processes.