Information and communication and chemical technologies

Vol. 4 No. 29 (2025) / 2025-12-30 / Number of views: 223

SOFTWARE AND TECHNICAL DEVICES FOR AUTOMATING THE PROCESS OF FORMING A THREE-DIMENSIONAL OBJECT USING THE SLM METHOD

Authors

K.Kulazhanov Kazakh University of Technology and Business
https://orcid.org/0000-0002-1195-6919
K.Kulazhanov Kazakh University of Technology and Business
https://orcid.org/0000-0001-5202-3501
K.Kulazhanov Kazakh University of Technology and Business
https://orcid.org/0000-0001-8632-5209
M.Kh.Dulaty Taraz University
https://orcid.org/0000-0003-1591-2697
M.Kh.Dulaty Taraz University
https://orcid.org/0009-0008-0988-0952

Keywords

programming, additive technologies, automation, algorithm, powder, G-code

Link to DOI:

https://doi.org/10.58805/kazutb.v.4.29-1273

How to quote

Тulegulov A., et al. “SOFTWARE AND TECHNICAL DEVICES FOR AUTOMATING THE PROCESS OF FORMING A THREE-DIMENSIONAL OBJECT USING THE SLM METHOD”. Vestnik KazUTB, vol. 4, no. 29, Dec. 2025, doi:10.58805/kazutb.v.4.29-1273.

Abstract

In modern conditions, the need to create automated, programmable, and autonomous production systems is becoming particularly relevant for military and field engineering units. Traditional selective laser melting (SLM) systems, despite their high accuracy and quality, are practically unsuitable for use outside of laboratory settings due to their complex design, expensive components, and sensitivity to environmental parameters. Therefore, this article aims to explore software and hardware solutions for automating the process of creating three-dimensional objects using SLM. This, in turn, will provide the conditions for the further development of an additive manufacturing system designed for use in field and military environments, capable of restoring and manufacturing metal parts in the face of limited resources and a lack of specialized infrastructure.