Manufacturing and manufacturing industries

Vol. 4 No. 29 (2025) / 2025-12-30 / Number of views: 140

FLOW RATE OF A HORIZONTAL WELL TAKING INTO ACCOUNT ANISOTROPY AND DEFORMABILITY OF THE FORMATION

Authors

Safi Utebaev Atyrau University of Oil and Gas
https://orcid.org/0000-0002-4776-2251
Safi Utebaev Atyrau University of Oil and Gas
https://orcid.org/0000-0002-6628-024X
Safi Utebaev Atyrau University of Oil and Gas
https://orcid.org/0000-0002-6327-870X
Safi Utebaev Atyrau University of Oil and Gas
https://orcid.org/0000-0001-7670-2015
Safi Utebaev Atyrau University of Oil and Gas
https://orcid.org/0009-0002-7397-1134
Safi Utebaev Atyrau University of Oil and Gas
https://orcid.org/0009-0001-9063-153X

Keywords

horizontal well, deformable reservoir, fluid inflow, permeability, hydrodynamic model, interference, parameter optimization.

Link to DOI:

https://doi.org/10.58805/kazutb.v.4.29-1268

How to quote

Bissengaliyev , M.D., et al. “FLOW RATE OF A HORIZONTAL WELL TAKING INTO ACCOUNT ANISOTROPY AND DEFORMABILITY OF THE FORMATION”. Vestnik KazUTB, vol. 4, no. 29, Dec. 2025, doi:10.58805/kazutb.v.4.29-1268.

Abstract

The article presents an analytical and numerical analysis of steady-state inflow to a horizontal well located in a finite isotropic circular formation with a deformable reservoir. A model has been developed that takes into account the effect of rock deformation on permeability changes, which has made it possible to obtain more realistic estimates of well flow rates. The influence of the length of the horizontal wellbore, its position relative to the roof and floor, the thickness of the formation, and interference during the operation of a well battery are investigated.

It has been established that at a certain ratio of the length of the wellbore to the thickness of the formation, the inflow to a horizontal well exceeds that of a vertical well. Symmetrical opening of the formation is optimal, as it minimizes resistance to inflow.

It has been shown that the deformability of the reservoir can reduce the flow rate by up to 21.6%, depending on the type of rock. The obtained dependencies and graphical-analytical ratios can be used for technical and economic evaluation and optimization of horizontal well parameters in the design and operation of oil and gas fields.