Manufacturing and manufacturing industries

Vol. 4 No. 29 (2025) / 2025-12-30 / Number of views: 183

METODOLOGY FOR DIAGNOSING AND ANALYZING THE PERFORMANCE OF WELLS EGUIPPED WITH ROD PUMPS AT THE LATE STRAGE OF DEVELOPMENT

Authors

Kyzylorda Bolashak University
https://orcid.org/0000-0002-6634-1057
Saint-Petersburg State Marine Technical University
https://orcid.org/0000-0002-0525-3731
K.Kulazhanov Kazakh University of Technology and Business
https://orcid.org/0000-0002-3790-2097
Kyzylorda Bolashak University
https://orcid.org/0000-0002-2688-5527
Korkyt Ata Kyzylorda University
https://orcid.org/0000-0002-4039-4900
Kyzylorda Bolashak University
https://orcid.org/0009-0004-2602-4235
Kyzylorda Bolashak University
https://orcid.org/0009-0001-7866-7476

Keywords

sucker rod pump installations, diagnostics, dynamometer card, echogram, highly water-cut wells, gas content, late stage of development

Link to DOI:

https://doi.org/10.58805/kazutb.v.4.29-1110

How to quote

Doszhanov, M., et al. “METODOLOGY FOR DIAGNOSING AND ANALYZING THE PERFORMANCE OF WELLS EGUIPPED WITH ROD PUMPS AT THE LATE STRAGE OF DEVELOPMENT”. Vestnik KazUTB, vol. 4, no. 29, Dec. 2025, doi:10.58805/kazutb.v.4.29-1110.

Abstract

Sucker rod pump installations (SRPIs) are reliable and cost-effective production equipment for oil wells, widely used in the development of low-rate and highly water-cut reservoirs. Oil production using sucker rod pumps is one of the most common artificial lift methods, which is explained by their simplicity, efficiency, and reliability. However, during the operation of SRPIs, complicating factors often arise: high gas content at the pump intake, increased content of mechanical impurities in the produced fluid, deposition of paraffins and asphaltene-resinous substances in the tubing strings.

This article proposes a comprehensive methodology for diagnosing the operation of SRPIs at the late stage of field development. Special attention is paid to the analysis of dynamometer cards and echograms to identify specific malfunctions characteristic of highly water-cut wells. Practical recommendations have been developed for optimizing the operation of installations, including the use of gas separators and hydraulic pulse impact on the near-wellbore zone of the reservoir. The results of field studies confirming the effectiveness of the proposed solutions for the conditions of Kazakhstani fields are presented.

The methodology allows monitoring the full cycle of impulse impacts on the reservoir and analyzing the effectiveness of the applied technologies for enhanced oil recovery. The research results are of practical importance for improving the operational reliability of SRPIs and increasing the inter-repair periods of equipment operation at the final stage of field development.