Меню
Vol. 3 No. 28 (2025) / 2025-09-30 / Number of views: 161
Authors
Keywords
Link to DOI:
How to quote
This study focuses on examining the physical and mechanical properties of silicate materials produced from local raw materials – kaolin. Silicate bricks were manufactured using the autoclaving method, utilizing both enriched and unenriched kaolin, slaked lime, and quartz sand. The autoclave parameters were set at 175-200°C and a pressure of 0.8-1.4 MPa, enabling the formation of a dense microstructure and significantly improving the material's strength and water-resistant characteristics. The research findings demonstrated that the use of kaolin as an additive significantly enhances the physical and mechanical properties of the bricks. X-ray phase analysis revealed the presence of phases such as quartz, mullite, anorthite, and magnetite in the brick composition, which contribute to improved structural integrity and performance characteristics. Additionally, it was established that samples with added enriched kaolin meet GOST standards for water absorption, vapor permeability, and thermophysical properties. The formation of calcium hydrosilicates and hydrogarnets during the autoclaving process improved the energy efficiency of the technology and ensured the high quality of the materials produced. Thus, the study confirmed the feasibility of using local kaolin for the production of energy-efficient construction materials that meet modern quality standards. The developed method is highly cost-effective and environmentally sustainable, making it a promising solution for industrial-scale applications in the construction industry.